The Microflex CE4-879 disposable, powder-free, silicone-free, hand-specific, sterile extended length multi-class latex glove is rated for use in Class 10/ISO 4 controlled environments and has textured fingertips. It has a palm thickness of 5.9 mils and a finger thickness of 7.9 mils, and is 11.0" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 5.1 mils thick. It complies with relevant ASTM International, formerly known as the American Society for Testing and Materials, (ASTM) standards and Association for the Advancement of Medical Instrumentation (AAMI) sterilization guidelines and has been tested in accordance with Institute of Environmental Science and Technology (IEST) standards. The gamma sterilized glove is certified sterile at a minimum dosage of 25 kilograys (kGy). It is suitable for medical device, pharmaceutical, biotechnology, and aseptic processing applications. Latex provides better elasticity than nitrile, chloroprene, or vinyl, and better puncture resistance than vinyl. The glove has a smooth surface on the palm and fingers for tactile sensitivity. One left-hand and one right-hand glove are included in each plastic wallet for sterile donning. This powder-free and silicone-free glove leaves no residue and helps to reduce the likelihood of spreading latex allergens and bacteria compared to a powdered glove. The color of this ambidextrous glove is off white.Tensile strength, measured in megapascals (MPa), is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has a tensile strength of 24 MPa before aging and 22 MPa after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage, and the higher the percent, the more the glove can stretch. This glove has an elongation of 750% before aging and 600% after aging. Microflex examination gloves meet or exceed applicable standards imposed by ASTM International and the Food and Drug Administration (FDA).Disposable and limited-use gloves are used in medical, forensic, scientific, art, and industrial applications. Gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance is defined by glove material and thickness, and may be improved with the use of certain exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough objects. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from pointed objects such as pins and needles. Chemical resistance means the glove helps protect the hand from certain chemicals. Chemical resistance is defined by glove material, thickness, and length, as well as the work environment and chemicals likely to be encountered. For information on the chemical resistance of this glove, consult the manufacturer's chemical resistance guide. Microflex Corporation manufactures disposable gloves. The company, founded in 1988 and headquartered in Reno, NV, meets International Organization for Standardization (ISO) 13485:2003.